[ipv6hackers] Difficulty with scan6

[Marc Heuse]

Hi Tim,

you can also use alive6 from the thc-ipv6 package (www.thc.org/thc-ipv6).
The following command does what you wanted to do with scan6:
  alive6 -v  -I 2600:2201::a2a2:a111:b1b1:b1be  eth0 
2600:54:b000::111:0-ffff
note: -I 2600: ... is a capital "i"

:-)

Greets,
Marc

On 28.10.2013 23:30, Tim wrote:
> Thanks for the suggestion.  However, -O2 isn't in the build routines
> in the version I have...
>
> tim
>
> On Mon, Oct 28, 2013 at 08:35:52AM +0100, Safuat Hamdy wrote:
>> Hi,
>>
>> I once had similar trouble with scan6; switching off -O2 for the build
>> helped.
>>
>> Am 25.10.2013 19:35, schrieb Tim:
>>> Hello,
>>>
>>> I'm trying to use Fernando's IPv6 Toolkit for the first time and have
>>> run into trouble with the scan6 tool.  I'm trying to run a simple
>>> remote scan like this:
>>>
>>> # scan6 -d 2600:54:b000::111:0/112 -v -v -i eth0 -s 2600:2201::a2a2:a111:b1b1:b1be 
>>> Error while performing Neighbor Discovery for the Destination Address
>>> Error while learning Souce Address and Next Hop
>> _______________________________________________
>> Ipv6hackers mailing list
>> Ipv6hackers at lists.si6networks.com
>> http://lists.si6networks.com/listinfo/ipv6hackers
> _______________________________________________
> Ipv6hackers mailing list
> Ipv6hackers at lists.si6networks.com
> http://lists.si6networks.com/listinfo/ipv6hackers
>

-- 
Marc Heuse

www.mh-sec.de
PGP: AF3D 1D4C D810 F0BB 977D  3807 C7EE D0A0 6BE9 F573