[ipv6hackers] Difficulty with scan6

Marc Heuse mh at mh-sec.de
Tue Oct 29 23:01:57 CET 2013


you make me cry ...

I presented on the "common address technique" in in 2010 and also
published the first tool to implement this.

of course alive6 supports it.

It's the -D option. and you can see the option + description when
looking at the help output.
alive6 even has the ability to scan ranged you define on the command line.
in your example you wanted to scan a /112 subnet.
and if you specify this like this: 2600:54:b000::111:0-ffff
alive6 scans all 65536 addresses.
easy.

greets,
marc

On 29.10.2013 18:19, Tim wrote:
> Hi Marc,
>
> Thanks for the suggestion.  However, what I need to do is scan for
> *likely* hosts within a v6 range.  The range I have to scan is far too
> large to try all of them, so I wanted use scan6's ability to pick out
> the most likely addresses.
>
> Can alive6 do this?  I don't see any documentation on that, but
> perhaps I missed something.
>
> Best regards,
> tim
>
>
> On Tue, Oct 29, 2013 at 09:36:29AM +0100, Marc Heuse wrote:
>> Hi Tim,
>>
>> you can also use alive6 from the thc-ipv6 package (www.thc.org/thc-ipv6).
>> The following command does what you wanted to do with scan6:
>>   alive6 -v  -I 2600:2201::a2a2:a111:b1b1:b1be  eth0 
>> 2600:54:b000::111:0-ffff
>> note: -I 2600: ... is a capital "i"
>>
>> :-)
>>
>> Greets,
>> Marc
>>
>> On 28.10.2013 23:30, Tim wrote:
>>> Thanks for the suggestion.  However, -O2 isn't in the build routines
>>> in the version I have...
>>>
>>> tim
>>>
>>> On Mon, Oct 28, 2013 at 08:35:52AM +0100, Safuat Hamdy wrote:
>>>> Hi,
>>>>
>>>> I once had similar trouble with scan6; switching off -O2 for the build
>>>> helped.
>>>>
>>>> Am 25.10.2013 19:35, schrieb Tim:
>>>>> Hello,
>>>>>
>>>>> I'm trying to use Fernando's IPv6 Toolkit for the first time and have
>>>>> run into trouble with the scan6 tool.  I'm trying to run a simple
>>>>> remote scan like this:
>>>>>
>>>>> # scan6 -d 2600:54:b000::111:0/112 -v -v -i eth0 -s 2600:2201::a2a2:a111:b1b1:b1be 
>>>>> Error while performing Neighbor Discovery for the Destination Address
>>>>> Error while learning Souce Address and Next Hop
>>>> _______________________________________________
>>>> Ipv6hackers mailing list
>>>> Ipv6hackers at lists.si6networks.com
>>>> http://lists.si6networks.com/listinfo/ipv6hackers
>>> _______________________________________________
>>> Ipv6hackers mailing list
>>> Ipv6hackers at lists.si6networks.com
>>> http://lists.si6networks.com/listinfo/ipv6hackers
>>>
>> -- 
>> Marc Heuse
>>
>> www.mh-sec.de
>> PGP: AF3D 1D4C D810 F0BB 977D  3807 C7EE D0A0 6BE9 F573
>>
>>
>> pub  4096R/6BE9F573 2013-09-06 Marc Heuse <mh at mh-sec.de>
>> sub  4096R/39D12FAF 2013-09-06

-- 
--
Marc Heuse

www.mh-sec.de
PGP: AF3D 1D4C D810 F0BB 977D  3807 C7EE D0A0 6BE9 F573



More information about the Ipv6hackers mailing list